FloPlast Shiplap Cladding - 150mm x 5mtr Anthracite Grey Woodgrain

Our 150mm by 5 metre shiplap cladding panels are manufactured in the UK by FloPlast, and are BBA Approved.Shiplap cladding is our most popular cladding option due to the ability to cover wide areas and its traditional overlap appearance suitable for external use as a decorative or protective facing.Each 5m x 150mm panel covers an area of 0.75 square metres and can be fixed over brick, block, masonry and timber framed walling. Each board has a tough durable finish meaning it has a high impact strength and is finished with a weather resistant skin making it a low maintenance option which will retain its exceptional appearance.If you have never installed PVC Cladding before, we suggest you take a couple of minutes to watch our video which also explains how to measure how much cladding is needed:Is PVC Cladding Safe?Our FloPlast cladding boards carry a reaction to fire classification of D-s3, d2/(AHM). This means that the system is not classified as non-combustible and may be used on buildings with no storey 18m or more above the ground and 1m or more from a boundary. With minor exceptions, the system should be included in calculations of unprotected area.Although the spread-of-flame across the surface of PVC is limited, the material does tend to char and may fall away when exposed to fire. Due consideration should always be given to any combustible materials behind the cladding, which may become exposed in the event of fire. Where necessary, cavity barriers should be incorporated behind the cladding, as required under the relevant national Building Regulations.