Kingfisher Weatherflex Stabilising Solution

Primer & Sealer for Porous or Weathered Masonry. Kingfisher Weatherflex Stabilising Solution is a solvent-free, fine-particle, pure acrylic ester copolymer primer, sealer, and stabiliser for masonry surfaces. It is specifically formulated to harden friable or chalking substrates, ensuring a stable base for subsequent coatings. This solution enhances adhesion, improves the depth of colour finish, and often reduces the amount of paint required.. Key Features & Benefits. Stabilises & Hardens: Effectively binds and primes chalking or dusty surfaces, preparing them for painting.. Improves Adhesion: Enhances the bond between the substrate and masonry paint, promoting a longer-lasting finish.. Reduces Paint Consumption: By sealing porous surfaces, it often decreases the amount of paint needed.. Quick Drying: Dries within 4–8 hours under normal conditions, allowing for timely application of topcoats.. Easy Application: Ready to use with brush, roller, or low-pressure sprayer.. Solvent-Free: Eco-friendly formulation with low VOC content.. Ideal For. Stabilising friable or "soft" masonry due to weathering.. Priming chalking surfaces prone to dusting.. Preparing newly cement-rendered surfaces for painting.. Reducing absorbency of porous exterior surfaces like brick, stone, and concrete.. Product Details. Colour: Clear upon drying.. Pack Size: 5 litres.. Cure Time: Allow surfaces to cure for a minimum of 24 hours before applying masonry paint.. Coverage: 4–6 m² per litre, depending on surface porosity.. Application Temperature: Do not apply if air or surface temperature is below 8 °C.. Shelf Life: 12 months in unopened, sealed containers stored in a cool, dry area away from frost and direct sunlight.. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from loose or friable materials. Remove any biological growth with Kingfisher Bio-Wash.. Application: Apply the solution evenly using a brush, roller, or low-pressure sprayer. One coat is typically sufficient, but very porous surfaces may require an additional application.. Drying Time: Allow 4–8 hours for each coat to fully dry, depending on ambient temperature.. Topcoat Application: For best results, allow surfaces to cure for a minimum of 24 hours before applying Kingfisher Weatherflex Smooth Masonry Paint.. Safety & Storage. Protective Measures: Wear gloves and overalls during application. If applying by spray, wear a face mask.. First Aid: Avoid contact with skin and eyes. If contact occurs, wash immediately with plenty of water.. Ventilation: Ensure good ventilation during application and drying.. Storage: Store in a cool, dry area away from frost and direct sunlight.. Disposal: Dispose of contents/container in accordance with local regulations.. For further Health and Safety information on this product, please refer to the Kingfisher Safety Data Sheet, available from the Kingfisher Technical Department.