12 Piece Microfibre Decorating Set

Achieve professional decorating results with this comprehensive 12-piece microfibre set, ideal for a variety of tasks around your home. From walls and ceilings to skirting boards, doors and window sills, this set has you covered.Included is a 9-inch (230mm) soft grip roller frame, accompanied by two 9-inch (230mm) microfibre fabric roller sleeves. For smaller areas, a 4-inch (100mm) soft grip mini roller frame comes with four 4-inch (100mm) microfibre mini roller sleeves and two 4-inch (100mm) foam mini roller sleeves. A 2-inch (50mm) wooden brush and a plastic paint tray complete the kit.The roller frame boasts patented Headlock technology, ensuring faster and easier decorating, with sleeves that stay securely in place. The microfibre roller sleeves provide a smooth, even paint finish.To remove a roller sleeve, simply squeeze the locking clips at the end of the roller head to disengage the lock and pull the sleeve free. To replace, slide a new sleeve over the cartridge and push the locking clips through the locking holes.Before first use, wash the sleeves and brush to remove any loose fibres, particles or filaments. Comb the brush to shape. Before each use, wet the fabric/foam sleeves and brush with water (or white spirit for solvent paint - foam sleeve and brush only), removing any excess to leave them slightly damp.After use, remove excess paint (with a roller scraper for fabric sleeves only) and wash thoroughly with water (or white spirit for solvent paint before rinsing with water - foam sleeve and brush only). Remove excess water with clean paper or a towel. Spin the fabric sleeves to shape, stand components on end to dry naturally, and comb the brush to shape.Avoid overloading, which can cause a patchy finish or skidding. Use a light, sweeping motion for best results. Once dry, store in a roller and brush wrapper or a dry, dust-free place, ready for your next decorating project.